Photonics
Photonics for Chiplet-Based Systems
Photonics is the science and technology of generating, guiding, modulating and detecting light. In chiplet-based systems, its principal interconnect application is to move data through optical links, while electronic circuits continue to perform computation, control and electrical signal processing.
Integrating optical interfaces close to processors and switches can extend high-bandwidth connectivity beyond the practical reach of dense electrical interconnects. Photonics therefore connects chiplet integration with a broader architectural goal: scaling communication between packages, boards and compute nodes. [1, 2]
Key terminology
| Term | Meaning in a chiplet architecture |
|---|---|
| Photonic integrated circuit (PIC) | A chip integrating optical components such as waveguides, modulators, couplers and photodetectors. |
| Silicon photonics (SiPh) | A technology platform for integrating photonic devices using silicon-based semiconductor manufacturing. Other materials may provide specific optical functions. |
| Electronic integrated circuit (EIC) | Electronics supporting the optical link, including modulator drivers, receiver amplifiers and control circuitry. |
| Optical I/O chiplet | A building block that provides optical input/output for a host device. Depending on the implementation, it may combine multiple photonic and electronic dies. |
| Optical engine | An assembly performing electrical-to-optical and optical-to-electrical conversion; its packaging and interfaces vary by implementation. |
| Co-packaged optics (CPO) | An integration approach placing optical engines in the same package as a switch or compute device. |
| Wavelength-division multiplexing (WDM) | Transmission of multiple optical channels at different wavelengths through a shared optical path. |
A PIC describes a type of circuit; an optical I/O chiplet describes a system function; CPO describes a packaging approach. The terms overlap but are not interchangeable. [1, 3, 4]
Why photonics matters for chiplets
Chiplets allow compute, memory and I/O functions to be implemented on separate dies. However, increasing the number of processing elements also increases the communication required between them.
Electrical connections remain essential within packages. As signaling rates and distances increase, channel loss and signal-integrity constraints make electrical communication more demanding. Optical interfaces can address some of these limitations by moving the conversion between electrical signals and light closer to the host device. [1, 2]
For chiplet architectures, the opportunity extends beyond connecting adjacent dies: optical I/O can help connect separate multi-die packages into larger systems. It does not imply that every short electrical die-to-die connection should become optical.
How an optical I/O link works
A representative link contains five functional stages:
- Electrical interface: the host sends data to the optical I/O subsystem through a short electrical connection.
- Optical modulation: electronic drivers control modulators that encode data onto light supplied by a laser.
- Optical transport: waveguides and optical fibers carry the signal. WDM can place several wavelength channels on one fiber.
- Photodetection: a photodetector converts received light into an electrical signal.
- Electrical reception: receiver electronics recover the data and deliver it to the destination device.
The PIC and EIC may be separate dies connected through advanced packaging. Their partitioning affects electrical parasitics, thermal behavior and assembly requirements. Intel’s 2024 optical compute interconnect demonstration, for example, combined photonic and electronic ICs in an optical I/O chiplet co-packaged with a CPU. [3, 5]
Silicon photonics and heterogeneous integration
Silicon photonics provides a manufacturing platform for optical circuits, but an optical subsystem need not consist entirely of silicon. Platforms may combine silicon and silicon nitride waveguides with materials suited to detection, modulation or light generation.
Photonics also uses process design kits (PDKs) and component libraries. These provide building blocks and process-specific design information, supporting repeatable circuit design rather than requiring every optical component to be developed from scratch. AIM Photonics, for example, provides active and passive PDK resources incorporating multiple waveguide layers and optical components. [4]
Chiplet integration allows photonic and electronic dies to use different fabrication processes. Imec’s research includes CMOS-to-photonics 3D integration, hybrid laser integration and fiber connectivity, illustrating how device technology and packaging must be developed together. [2]
Optical I/O and co-packaged optics
Optical I/O describes a connectivity function, whereas CPO describes where the optics are integrated. An optical I/O chiplet can therefore be part of a CPO implementation.
Industry terminology varies: some suppliers distinguish compute-oriented optical I/O from switch-oriented CPO. For technical comparisons, the host interface, package architecture and link requirements are more informative than the label alone. [6]
| Integration approach | Optical conversion location | Main architectural consideration |
|---|---|---|
| Pluggable optics | In a removable module, commonly at the front panel | Accessible modules, with an electrical path from the host to the module. |
| Co-packaged optics | In the host package | A shorter electrical path, with tighter packaging and thermal dependencies. |
| 3D-integrated optics | Within a vertically integrated electronic–photonic assembly | Dense integration requiring coordinated device, bonding and thermal design. |
These approaches can coexist. Greater integration changes manufacturing and serviceability requirements as well as bandwidth and power characteristics. [1]
The role of the laser
An optical link requires a light source. Two broad approaches are integrated or closely attached lasers, and external laser sources that deliver light to the optical engine.
External sources can place the laser away from a hot processor package and make replacement easier. They also require optical delivery paths and introduce associated coupling losses. Integrated approaches reduce the separation between source and photonic circuit but must account for thermal conditions and reliability.
Ayar Labs’ TeraPHY and SuperNova architecture illustrates the external-source approach. It is one implementation choice, rather than a requirement for all optical I/O chiplets. [6]
Relationship with UCIe
An optical I/O chiplet may expose an electrical die-to-die interface to its host. UCIe can serve this package-level connection, while the optical subsystem transports data between packages.
The UCIe Consortium has described optical chiplets with UCIe-compliant electrical interfaces for this purpose. However, compatibility at the electrical interface should not be treated as proof of complete optical-link interoperability. Optical characteristics and end-to-end protocol support must also match. [7, 8]
Integration challenges
Optical coupling and assembly. Connecting a photonic die to fibers or package waveguides requires controlled alignment and low optical loss. Assembly yield and scalable attachment processes are central concerns. Optical redistribution layers are one approach under investigation. [9]
Thermal behavior. Photonic devices, lasers and host processors have different temperature sensitivities. Their placement, cooling and control requirements must be considered together. [1, 6]
Testing and reliability. Electrical, optical and package behavior must all be verified. Component performance alone does not establish the yield or lifetime of the assembled system. [2]
Power accounting. Comparisons should state whether energy-per-bit figures include laser power, drivers, receiver electronics, tuning and any additional link processing. Different measurement boundaries can produce misleading comparisons.
System architecture. High link bandwidth does not by itself guarantee low application latency or efficient scaling. Protocol overhead, topology and workload communication patterns remain relevant.
Applications in chiplet-based systems
Relevant application areas include communication between AI accelerators, high-performance computing nodes and switch devices. Optical I/O is also being explored for architectures that connect compute and memory resources over greater distances. [2, 6]
For the chiplet ecosystem, photonics adds another dimension to heterogeneous integration: electronic compute dies, interface electronics, optical circuits and light sources must operate as a coordinated system. The value depends on the complete interconnect design, including packaging, power, reach and manufacturability.
Frequently asked questions
Is a photonic chiplet an optical processor?
Not necessarily. An optical I/O chiplet transports data. Optical computing uses photonic devices to perform computational operations; it is a separate function.
Does silicon photonics eliminate electronics?
No. Drivers, receiver circuits, control logic and host interfaces remain essential to an optical communication subsystem.
Does CPO require an integrated laser?
No. CPO implementations can use integrated or external light sources. [6]
Will optics replace every electrical chiplet connection?
There is no universal replacement rule. The appropriate link depends on distance, bandwidth, power, cost and integration constraints.
References and further reading
- imec — Scaling optical interconnects for the AI era.
- imec — Next-generation silicon photonics.
- imec — Optical interconnect research program.
- AIM Photonics — Active and Passive Process Design Kit.
- Intel — Intel Demonstrates First Fully Integrated Optical I/O Chiplet, June 26, 2024.
- Ayar Labs — Advancing the Next-Generation of AI: The Evolution of Optical I/O with the SuperNova Light Source, April 30, 2024.
- UCIe Consortium — UCIe in Optical Networking.
- UCIe Consortium — About UCIe.
- imec — Interfacing silicon photonics for high-density co-packaged optics.
Related Articles
- Hardware Trojan Threats to Multi-Chiplet Photonic Neural Network Accelerators
- A Time-Encoded Analog Photonic Interposer for Energy-Efficient Integration of Analog Vision Sensors and Analog Accelerators
- AI-Driven Thermal Mapping and Management in 3D Integrated Photonic Circuits
- Cross Waveguide Design for Color-Centers in Diamond for Photonic Quantum Computing
- Advances in waveguide to waveguide couplers for 3D integrated photonic packaging
Related Blogs
- Building out the Photonic Stack
- Scalable Testing of Xanadu’s Canadian made Quantum Photonic Chips with MPI Corporation’s Advanced Electro-Optic Probe Systems
- Addressing challenges and embracing advances with photonic package design
- Accelerate the Photonic IC Design with Cadence EPDA Environment
- Q&A: What Real-World Projects Reveal About Multi-Die Design
Related News
- Silicon Austria Labs Adopts PulseForge Photonic Debonding Technology to Accelerate Advanced Packaging and Heterogeneous Integration Research
- Atomica Launches AI Photonic Integration Platform to Address the Integration Bottleneck in AI Infrastructure
- Lightmatter Joins NVIDIA NVLink Fusion and Powers Next-Generation AI Infrastructure with Photonic Interconnects
- POET Technologies and Lumilens Advance Wafer-Level Photonic Integration for Next-Generation AI Optical Networks
- Xanadu and EV Group partner to build industrial-scale photonic quantum hardware
Featured Content
- Starscream: Reimagining LLM Sharding on AMD Instinct GPUs with GPU Partitioning
- JEDEC® Announces Creation of JC-14.8 Subcommittee on System Level Reliability Testing (SLRT); Invites Industry Participation
- UCIe Consortium Advances from Chiplet Connectivity to System-Level Integration with UCIe 4.0 Specification
- Netherlands and Taiwan Launch Four Joint Photonics R&D Projects
- ASRA and imec release joint architectural requirements for interoperable automotive chiplets
- Crealights’ Self-Developed Silicon Photonics Chip “Greyhound” Makes Its Appearance at CIIE, Showcasing a “Chinese Solution for the Token Economy”
- Tri-Stack-PIM: A Heterogeneous Multi-Die 3D-Integrated Processing-in-Memory Architecture for Efficient LLM Inference
- CU-3D: A Scalable Legality-Aware RTL-to-GDS Flow for 3D-IC Physical Design
- Staera Semiconductor Emerges from Stealth with US$4.6 Million to Build Light into the Chip and Break AI's Data Bottleneck
- The chip beneath the chips: Why silicon interposers matter more than ever
- Vertical Compute expands partnership with imec to accelerate commercial manufacturing of Vertically Integrated Memory (VIM)
- Imec advances Europe's silicon interposer technology capabilities through NanoIC pilot line, paving the way for open chiplet design
- When Every Chiplet Passes, Who Fixes the Package?
- Beyond Host-Side Control: HBM Controller Partitioning Across Host and HBM Base Dies
- The European Chip Ecosystem